55
4.6 CompactFlash Card Usage
It is important to follow a few simple guidelines to help avoid loss of data
when working with CompactFlash cards, card readers and digital cameras.
Phase One recommends that you test-drive all new CompactFlash cards
including the one that comes with your IQ back. By performing an initial test
to verify that the capture les are stored properly on the card and can be
accessed on a computer you will avoid unpleasant surprises on location or
when you return from a job. CompactFlash cards are manufactured by other
suppliers and Phase One cannot guarantee that the cards are not defective.
Inserting and Ejecting on the IQ2 Back
The CompactFlash card is inserted in the hidden slot located under the cover
on the left hand side of the IQ back.
Insert the CompactFlash card with the brand label facing the display end of
the digital back as shown in the image.
The cover can be closed when the CompactFlash card is fully inserted.
To eject the card push the small button above the card once, and an ejecting
pin will come out. Pushing this pin all the way back in will eject the card.
Microdrives are not recommended for use with IQ backs.
To Next Page
Loading...
Need help?
General
