Philips Respironics SimplyGo Mini User Manual

35
SimplyGo Mini User Manual
English
Visual, Audio
Indicators
Description What To Do
1 beep
that repeats every
16 seconds
High Breath Rate Alarm
This alarm indicates that
the user’s breath rate is
exceeding the maximum
pulse rate of the device�
The device is still working
properly and is still
providing the maximum
amount of oxygen for the
user’s setting�
Press the yellow Alarm
silence button on the
screen to temporarily
silence the alarm, and
the 2nd screen shown
at left appears� Or, press
the Home button on the
device to return to the
Home screen, and the 3rd
screen will appear with
the High Breath Rate (MX)
alarm symbol in the upper
left corner to indicate the
alarm state�
Note: This alarm could
take up to 2 minutes to
activate from the time
the alarm condition is
present�
The indicator
resets itself when
the breath rate is
reduced� Breathe
slower or remove
the cannula for 30
seconds to reset the
alarm�
If this indicator
regularly occurs,
contact your
equipment
provider�

Philips Respironics SimplyGo Mini Specifications

General

Battery Duration (Standard Battery)	Up to 4.5 hours
Battery Life	Up to 4.5 hours with standard battery, up to 9 hours with extended battery
Oxygen Concentration	87% to 96% at all settings
Pulse Dose Settings	1 to 5
Recharge Time (Standard Battery)	Approximately 4 hours
Recharge Time (Extended Battery)	8 hours
Operating Altitude	Up to 10, 000 feet (3048 meters)
Sound Level	43 dBA (at pulse dose setting 2)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Altitude Range	Up to 10, 000 feet (3048 meters)
Weight	5 lbs (2.3 kg) with standard battery
Humidity Range	15% to 95% non-condensing