Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Preface
1-10
Configuration Information
With the introduction of the LIFEPAK 500 Biphasic AED, Physio-Control
implemented a Parts Configurator. Information regarding an AED’s
configuration may be obtained by clicking on the Parts Configurator link. The
previous configuration scheme, as indicated by final assembly part numbers with
a three-digit dash number, is current through the following AED part numbers:
■ LIFEPAK 500 Monophasic AEDs 3005400-000 through 3005400-335
Monophasic AEDs starting with operating system version 4.5, and all biphasic
AEDs, have part numbers with six-digit variants. Depending on the waveform
technology, these part numbers are of the form:
■ 3005400-XXXXXX for the LIFEPAK 500 Monophasic AED
■ 3011790-XXXXXX for the LIFEPAK 500 Biphasic AED
Unless otherwise noted, functions and features are consistent as specified
throughout this manual. Differences are noted as appropriate. For information
about attributes of a particular LIFEPAK 500 AED, with a three-digit dash
number in its part number, consult the Product Line History in the Parts Lists
and Assembly Diagrams section.
To Next Page
Loading...
