Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Modes of Operation
5-5
Data Transfer Mode Page 1 of 2
Incident Scene Review In Data Transfer Mode, the LIFEPAK 500 AED can accurately re-create an
incident scene on a remote computer running the QUIK-VIEW™ 500 data review
program or the CODE-STAT™ data management system. The AED enables
simultaneous playback of digitally recorded audio (units with optional voice only)
and continuous patient ECG. These data review programs support synchronized
audio and ECG playback. For more information about data transfer, click
Sending Data to a Computer by Direct Connection for details in the LIFEPAK
500 Operating Instructions.
System Requirements ■ PC-compatible 75 MHz Pentium, minimum
■ 16 MB memory (RAM), minimum
■ 16550 serial communications chip
■ 3.5-inch 1.4 MB floppy disk drive
■ VGA color graphics display (640 × 480 pixel resolution), minimum
■ 2-button mouse/track ball
■ Windows 95, Windows 98, or Windows 2000 (for audio playback) or
Windows 3.1 (without audio playback)
■ Additional equipment such as a printer, modem, sound card, or speakers
To Next Page
Loading...
