EasyManua.ls Logo

Physio Control LIFEPAK 500 - Auto Battery Test Mode

Physio Control LIFEPAK 500
259 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Modes of Operation
5-13
Auto Battery Test Mode Page 1 of 3
The AED performs an automatic battery test routinely during Auto Test (every
week for an SLA battery and every two weeks for a lithium battery), and under
most circumstances when you replace the battery and then turn on the unit. In
Auto Battery Test Mode, the AED charges the Energy Storage Capacitor while
monitoring battery voltage to determine the remaining battery capacity. The Auto
Battery Test renders one of the following advisories of battery status:
BATTERY OK
Battery indicator illuminated steadily and the LOW BATTERY message
displayed. At the time the low battery indicator first comes on, remaining
battery capacity is sufficient to deliver 11 or more shocks with a
nonrechargeable battery or 6 or more shocks with a rechargeable battery.
Battery indicator flashes on and off and the REPLACE BATTERY message
is displayed. Remaining battery capacity is sufficient to deliver 3 or more
shocks. The battery is very low. Replace the battery immediately.

Table of Contents

Related product manuals