Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Parts Lists and Assembly Diagrams
12-56
LIFEPAK 500
AED Assembly
Diagrams
This section contains LIFEPAK 500 AED assembly diagrams as they are
installed on the AED final assembly. Each Assembly Diagram depicts a different
view of the AED. Numbered call-outs identify the individual AED components.
Click on a number associated with a call-out to complete one of two actions:
■ Identify a component part number
■ Jump to the Final Assembly Versions table if a component is unique to a
specific version of the AED (e.g., language specific labels). To identify the
part number, click the appropriate AED version on the Final Assembly
Versions table to jump to the Unique Final Assembly Parts listing.
Upper Case Exterior Labels and LCD Shield, 3-Button Units
Upper Case Exterior Labels and LCD Shield, 2-Button Units
Lower Case Exterior Labels and Hardware
Main PCB and Attaching Hardware
Lower Case Interior Components—Monophasic AED
Lower Case Interior Components—Biphasic AED
Wire Routing and Tie-Wrap Placement—Monophasic AED
Wire Routing and Tie-Wrap Placement—Biphasic AED
LIFEPAK 500 Monophasic AED Interconnection Diagram
LIFEPAK 500 Biphasic AED Interconnection Diagram
To Next Page
Loading...
