Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Modes of Operation
5-3
Setup Options
The LIFEPAK 500 AED provides two types of setup options: those that are user-
accessible and those reserved for qualified service personnel via the Service
Mode. With the following setup options, you can define user-accessible
operating features for the LIFEPAK 500 AED:
Click Setup Options for details in the LIFEPAK 500 AED Setup Instructions.
With the Setup Cable, PN 3010779-000, you can transfer setup option values
from one LIFEPAK 500 AED to another. Click Transferring Setup Between
AEDs for instructions.
■ Device ID
■ Modem phone number
■ Modem selection
■ Modem initialization string
■ Energy sequence
■ Energy protocol
■ Display energy
■ Auto analyze
■ CPR time 1
■ CPR time 2
■ Pulse Prompt (monophasic
operating system version 5.5 and
biphasic version 3.8 or later)
■ CPSS during CPR
■ Motion Detection
■ Asystole Detector
■ Audio recording (only included if
optional scene audio recording
feature is installed)
■ Paper size
■ Incident ID
■ Audio Alert (biphasic operating
system version 3.8 or later)
■ Transfer setup
To Next Page