Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Modes of Operation
5-6
Data Transfer Mode Page 2 of 2
Patient Data
Management
In Data Transfer Mode, the LIFEPAK 500 AED uses the DATA TRANSFER™ 500
information management program to manage patient data by downloading it
directly to a printer, modem, or personal computer. The DATA TRANSFER 500
information management program generates and prints patient reports, including
CODE SUMMARY critical event records. The DATA TRANSFER 500 information
management program is compatible with the CODE-STAT data management
system and the QUIK-VIEW 500 data review program, enabling system-wide
analysis.
System Requirements ■ PC-compatible 33 MHz 80386-DX, minimum
■ 4 MB memory (RAM), minimum
■ 16550 serial communications chip
■ 3.5-inch 1.4 MB floppy disk drive
■ VGA color graphics display (640 X 480 pixel resolution), minimum
■ 2-button mouse/track ball
■ Windows 3.1, Windows 95, or Windows 98
■ Additional equipment such as a printer, modem, or fax/modem
To Next Page
Loading...
