Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Product Description
3-3
Physical Description and Features Page 2 of 7
Options These options are available on both the LIFEPAK 500 Monophasic AED and
LIFEPAK 500 Biphasic AED.
Feature/Function Options
Analyze Mode Analyze Button—auto or manual
analyze
Auto Analyze—auto analyze only (uses
Auto Analyze 2 mode—see Operating
Instructions)
1
Audio Recording Voice—storage of audio from event
scene
2
No voice—no storage of scene audio
1. “2-button” models have a blank overlay key, called the “menu” key, in place of the ANALYZE key found on 3-button models. This key is for use in Setup and
Service modes. Throughout this service manual, the reference “ANALYZE (or Menu) key” indicates a setup or service-mode use of this key.
2. In voice models, audio recording is selectable (factory default is ON). There is a Setup mode function to turn recording off. Turning recording off frees
memory for increased ECG storage capacity.
To Next Page
Loading...
