EasyManua.ls Logo

Physio Control LIFEPAK 500 - Service Mode

Physio Control LIFEPAK 500
259 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Modes of Operation
5-16
Service Mode Page 1 of 5
Service Mode functions shown on the front panel allow qualified personnel to:
Turn Auto Battery Test on or off
Review and clear the recorded fault codes
Review and clear the shock counters
Review and clear the hour meter
Set the AED serial number
Set the AED dash number (LIFEPAK 500 Monophasic AED, operating
system software version 4.42 and earlier only)
Review AED prompts
Review AED tones
Adjust LCD contrast (LIFEPAK 500 Monophasic AED, operating system
software version 4.42 and earlier only)
WARNING!
Shock hazard. Follow the procedures carefully for discharging the Energy
Storage Capacitor whenever opening the LIFEPAK 500 AED case. With
Auto Battery Test enabled, the AED automatically charges to 50 J above
any capacitor remnant charge when powered up in the Service Mode.

Table of Contents

Related product manuals