Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Preface
1-12
Glossary Page 2 of 2
■ FAST-PATCH
®
defibrillation cable – Defibrillation cable for attaching
FAST-PATCH disposable defibrillation/ECG electrodes to the AED.
■ Monophasic – Property of the shock waveform generated by the LIFEPAK
500 Monophasic AED. The monophasic pulse (Edmark) characteristic is
damped sinusoid per AAMI DF2-1989 3.2.1.5.1.
■ QUIK-COMBO™ pacing/defibrillation/ECG electrodes system – An
electrode system that allows delivery of therapy to the patient.
■ QUIK-COMBO patient simulator – A combination lead tester/patient cardiac
rhythm simulator. The simulator is designed for use in training clinical
personnel in the operation of the LIFEPAK 500 AED.
■ REDI-PAK™ preconnect system–Avariant of the QUIK-COMBO
electrodes. The system allows preconnection of QUIK-COMBO electrodes to
the AED without removing the electrodes from their air-tight sealed pouch
until needed for patient treatment.
■ Test Load – A device that provides an external test load for the AED. The test
load connects to the patient connector on the AED.
■ Test Log Report – A report listing the time and results of the Auto Tests and
Test Load Tests. If a test fails, the report lists fault codes that can help
authorized service personnel troubleshoot and repair the AED. See a
sample Test Log Report in the LIFEPAK 500 AED Operating Instructions.
To Next Page
Loading...
