Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 500 automated external defibrillator Product Description
3-8
Physical Description and Features Page 7 of 7
Number Description
15 The LIFEPAK 500 nonrechargeable lithium battery pak provides
power for the LIFEPAK 500 AED.
16 The LIFEPAK 500 rechargeable SLA battery pak provides power
for the LIFEPAK 500 AED. The SLA (Sealed Lead-Acid) battery
pak is recharged by the battery charger (18).
17 The QUIK-COMBO pacing/defibrillation/ECG electrodes (with the
REDI-PAK preconnect system) enable delivery of therapy to the
patient. Connect the electrodes to the cable connector on the AED.
18 The battery charger provides power to recharge the rechargeable
SLA battery pak. Order appropriate power cord separately.
19 The test load provides an external test load for the AED. Connect
the test load to the cable connector on the AED.
20 The Setup Transfer Cable connects two units in order to transmit
the current state of setup options from one unit to the other.
21 The depicted data cable is one of three available. The data cables
allow transfer of data from the AED to a computer, modem, or
printer. The data cables plug into the cable connector on the AED.
22 The carrying case helps protect the AED and provides storage for
the electrodes.
To Next Page
Loading...
