Pitney Bowes DM300C - Moistener Maintenance

12-10
12 • Maintenance
SV62261 Rev. C
Check Level Here
Fill Here
Filling the Moistener (DM300c)
Refer to the following procedure to refill the moistener.
1. Check the moist en er tank to see how much sealing so lu tion is left.
2. Add enough Pitney Bowes E-Z Seal
®
sealing solution to bring the
sealant level up to the bottom of the fill hole. We rec om mend E-Z
Seal
®
be cause it helps keep your moist en er clean and im proves
seal ing ef fi cien cy.
IMPORTANT:
Do not overfi ll the moistener tank.
3. If the tank was emp ty, al low 30 min utes for the moist en er brush
and wick to get com plete ly wet.