12-17
12 • Maintenance
SV62261 Rev. C
4. Clean the moistener brush by running the it under plain water.
Blot the excess water from the brush after rinsing it.
i
NOTE: Replace the assembly if it cannot be cleaned thoroughly.
Cleaning the Stripper Blade/Brush Assembly (DM475)
Maintaining the Moistener (cont'd)
5. If you need to clean the wick and shield, continue with Cleaning
the Shield and Wick on the next page.
6. Slide the assembly back onto the machine. You should hear a
click as it engages.
7. Lower the moistener clearance lever and close feeder/WOW
cover.
Stripper Blade and Brush
To Next Page
Loading...
