Pitney Bowes DM300C - Page 92

6-18
6 • Adding Postage/Connecting to Data Center
SV62261 Rev. C
Entering the Dialing Prefix
Use this if you need to dial a prefix number (like 9) to get an out side
line.
1. Press Menu.
2. If necessary, press the green down arrow key to scroll through
the menu screens.
3. Select "Data Center Options".
4. Select "Phone Settings".
5. Select "Dialing Prefix".
6. Key in the prefix number you want (such as a "9") and select
"Accept". You return to the Phone Settings menu.
Analog Phone Line Connection Settings (continued)
Selecting the Dialing Type ( Tone/Pulse)
Use this to tell the system whether your have a tone or pulse type
phone.
1. Press Menu.
2. If necessary, press the green down arrow key to scroll through
the menu screens.
3. Select "Data Center Options".
4. Select "Phone Settings".
5. Select "Dial Type" to toggle between "Tone" and "Pulse". Select
the appropriate option.
Settings for Connecting to the Data Center (cont'd)