3
3.77
4. Rotate camshaft until pin
r
is at 10:00 position
t
.
5. Install camshaft carrier and install all carrier bolts
snug. Torque in two steps following sequence
shown.
TORQUE
Carrier Bolts:
12 ft-lb (17 Nm)
CAMSHAFT TIMING
Refer to Camshaft Timing Quick Reference ( [Either the
href or the keyref attribute should be set on xref
elements] page).
IMPORTANT
Valve and/or piston damage can occur if engine is
rotated with camshaft incorrectly timed.
1. Using an open-end wrench across the flats on the
end of the camshaft, rotate camshaft clockwise until
pin
q
is facing UP.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
