10.10
FRONT CAB
FRONT CAB REMOVAL
1. Remove the seat.
2. Remove the side panels.
3. Remove the front rack and storage compartment.
4. Remove the Tuflock fasteners
q
and screws
w
fastening the front cab to the fender flares and
footwells.
NOTE
Right side shown
5. Remove the gas cap and cover opening with tape to
prevent debris from entering the fuel tank.
6. Remove the fasteners
e r
retaining the front cab.
7. Remove the center cover
t
located under the pod.
8. Remove the diagnostic port cover
y
from the front
cab.
9. Remove the front cab.
BODY / FRAME
To Next Page
Loading...
