11.40
IDD – USB FLASH DRIVE RECOMMENDATIONS
Polaris recommends using a Scandisk® or similar USB
flash drive with a minimum of 4 GB available memory.
USB Flash Drive Notes / Troubleshooting
• The flash drive must be formatted as FAT 32. Use
Quick Format on the PC to format the drive as FAT 32.
IMPORTANT
Formatting the flash drive will erase all of its contents.
• Use a dedicated USB flash drive with only RIDER X
Maps-Trails / IDD update files on the drive.
• Don’t create file folders on the flash drive. Download
the RIDER X Maps-Trails or IDD update files to the
root level of the drive.
• When removing the flash drive from the PC or laptop,
use the “Safely Remove Hardware and Eject Media”
tool provided by the operating system.
• Updating the IDD does not require the engine to be
running if the ATV is equipped with a battery. Verify the
battery is fully-charged.
• If errors are encountered during the update process or
the IDD does not recognize the USB flash drive, follow
these steps:
1. Re-format the drive as FAT 32.
2. Download the update file again from RIDER X.
3. Re-attempt to update the IDD.
4. If the IDD does not recognize the USB flash drive,
try the procedure with a different flash drive.
ELECTRICAL
To Next Page
Loading...
