5
5.17
SPIDER REMOVAL
1. Install clutch in holding fixture
q
in a vise. Loosen the
spider (clockwise) using Clutch Spider Removal Tool
w
with a breaker bar. Threads are left-handed.
ITEM DESCRIPTION
q
2871358–B
Clutch Holding Fixture
w
2870341
Spider Removal Tool
NOTE
It is important that the same number and thickness of
washers are reinstalled beneath the spider during
assembly. Be sure to note the number and thickness of
these washers.
2. Inspect the Teflon™ coating on the moveable sheave
bushing.
Moveable Sheave Bushing Inspection:
Replace the cover bushing if more brass than Teflon is
visible on the bushing. Refer to bushing replacement in
this chapter.
PVT SYSTEM
To Next Page
Loading...
