Polaris Sportsman 850 - Front Cab Installation

10
10.11
FRONT CAB INSTALLATION
1. Place the front cab and align the mounting holes.
2. Place the center cover
q
under the pod.
3. Install the mounting fasteners
we
that retain the
front cab and center cover.
4. Install the Tuflock fasteners
r
and screws
t
that
fasten the front cab to the footwells and fender flares .
5. Install the diagnostic connector tree clip
y
in the hole
in the cab.
6. Remove the tape from the gas tank inlet.
7. Install the gas cap.
8. Install the storage tray.
9. Install the front rack.
10.Install the side panels.
11. Install the seat.
BODY / FRAME