Polaris Sportsman 850 - High Lifter; Voltage Regulator Removal; Voltage Regulator Removal, High Lifter

11.64
3. Connect the regulator harness to the stator.
4. Install the left footwell. Torque to specification.
TORQUE
Footwell Fasteners: Torque Until Fully Seated
5. Install the side panel and seat.
6. Install the fasteners that retain the regulator. Torque
to specification
TORQUE
Regulator Fasteners: 75 in-lbs (7Nm)
7. Connect the battery positive terminal.
TORQUE
Battery Terminal
6 ft /lbs
8. Connect the battery negative terminal.
TORQUE
Battery Terminal
6 ft/lbs
9. Install the center panel below the pod.
10.Install the front rack / storage compartment.
HIGH LIFTER
VOLTAGE REGULATOR REMOVAL, HIGH LIFTER
(Applies to High Lifter models)
1. Place the vehicle in park.
2. Disconnect the battery negative.
3. Disconnect the battery positive.
4. Remove the fasteners
q
retaining the voltage
regulator.
5. Release the Lock & Ride fasteners
w
retaining the
radiator cover and remove the cover.
6. Remove the fuse box cover.
ELECTRICAL