7.22
14. Add the recommended amount of fluid. Maintain fluid
level even with the bottom threads of the fill plug
hole.
FLUID CAPACITY
Recommended Front Gearcase Fluid:
Polaris Demand Drive Fluid
(PN 2877922) (Quart)
Capacity: 9.3 oz. (275 ml)
15. Reinstall fill plug with a new O-ring and torque to
specification.
TORQUE
Drain / Fill Plug:
10 ft-lbs (14 Nm)
16. Check for external leaks.
EPS
FRONT GEARCASE REMOVAL (EPS MODELS)
1. Stop engine and place gear selector in Park.
CAUTION
Serious injury may result if machine tips or falls. Be
sure machine is secure before beginning this service
procedure. Always wear eye protection.
2. Remove both front drive shafts from the front
gearcase. See: , page 7.13
3. Remove the front propshaft from the front gearcase
input shaft. See: , page 7.15
4. Disconnect the gearcase wiring harness.
5. Remove and discard the cotter pins
q
and nuts
w
from each tie rod end at the steering post frog.
6. Remove the power steering unit from the vehicle.
See: EPS Unit Removal, page 8.11
7. Remove the bolts retaining the lower steering post
assembly to the front gearcase.
FINAL DRIVE
To Next Page
Loading...
