11
11.79
HAND / THUMB WARMERS
HAND / THUMB WARMER RESISTANCE CHECKS
The low heat element circuit in the element pad will always be the circuit with high resistance. The circuit with low re-
sistance will be the high setting element. If an element pad’s circuit is out of range (either too high or too low), the oper-
ator may notice a heat imbalance between the left and right warmers.
Handlebar Hand Warmer Elements - PN: 2410567
HANDLEBAR HAND WARMERS
COLORS CONNECTOR PIN CONNECTOR PIN Ω VALUE @ 72° F
BRN - BLU/RED
A B
7.6 - 9.6 ± 12%
BRN - BLU A
C 12.9 - 16.5 ± 12%
Thumb Warmer Element - PN: 2410420
THUMB WARMER
COLORS CONNECTOR PIN CONNECTOR PIN Ω VALUE @ 72° F
BRN - WHT/GRY
A B 40.5 - 49.5
BRN - OR/GRY
A
C
81 - 99
Passenger Hand Warmer Elements - PNs: 2411651 / 2411652
PASSENGER HAND WARMER ELEMENTS
COLORS CONNECTOR PIN CONNECTOR PIN Ω VALUE @ 72° F
BRN - BLU
3 4
22.3 - 27.2
LO = Pin 1 LO = Pin 4
BRN - BLU/RED
2 4
14.9 - 18.2
HI = Pin 1 HI = Pin 4
NOTE
The passenger hand warmer kits feature an element pad and switch / connector assembly for the right-hand grip.
The left-hand grip element pad plugs into the right-hand grip switch harness.
ELECTRICAL