4.4
EFI SPECIAL TOOLS
PART NUMBERS / DESCRIPTIONS
PART
NUMBER
TOOL DESCRIPTION
PU-43506-A
Fuel Pressure Gauge Kit
PS-48762
Fuel Pressure Gauge Adaptor
PU-47063-B
Digital Wrench® Diagnostic Software
(Includes most recent version of
software w/serial number, standard
interface cable, USB-Serial Adaptor
cable and SmartLink Module Kit)
PU-47471
Digital Wrench® SmartLink Module Kit
(PU-47470, PU-47469, PU-47468)
PU-47470
Digital Wrench® PC Interface Cable
PU-47469
Digital Wrench® Vehicle Interface Cable
PU-47468
Digital Wrench® SmartLink Module
Bosch Automotive Service Solutions 1-800-345–2233
or www.polaris.service-solutions.com
WARNING
* Gasoline is extremely flammable and explosive under
certain conditions.
* EFI components are under high pressure. Verify
system pressure has been relieved before disassembly.
* Never drain the fuel system when the engine is hot.
Severe burns may result.
* Do not overfill the tank. The tank is at full capacity
when the fuel reaches the bottom of the filler neck.
Leave room for expansion of fuel.
* Never start the engine or let it run in an enclosed area.
Gasoline powered engine exhaust fumes are poisonous
and can cause loss of consciousness and death in a
short time.
* Do not smoke or allow open flames or sparks in or
near the area where refueling is performed or where
gasoline is stored.
* If you get gasoline in your eyes or if you should
swallow gasoline, seek medical attention immediately.
* If you spill gasoline on your skin or clothing,
immediately wash with soap and water and change
clothing.
* Always stop the engine and refuel outdoors or in a
well ventilated area.
FUEL PRESSURE GAUGE KIT - PU-43506-A
NOTE
The EFI fuel system remains under high pressure, even
when the engine is not running. Before attempting to
service any part of the fuel system, the pressure must
be relieved. The Fuel Pressure Gauge Kit has an
integrated pressure relief valve that can be used to
bleed off pressure. Use the included adapter PS-48762
for this vehicle.
FUEL SYSTEM
To Next Page
Loading...
