6.6
15. Remove the (7) bolts retaining the transmission to
the engine.
16. Remove the (2) vent lines from the top left portion of
the transmission.
17. Remove the lower right airbox retaining screw.
18. Remove the (4) bolts securing the right-hand frame
support and remove the support from the vehicle.
19. Remove the (3) screws retaining the rear right-hand
footwell support and remove the support from the
frame (TOURING Models Only).
20. Remove the (2) through-bolt fasteners that mount
the transmission to the isolator mount on the lower
LH side.
21. Using a T45 driver, remove the screw from the top of
the isolator mount on the lower RH side.
TRANSMISSION
To Next Page
Loading...
