Porsche Wallbox - Required Tools

GB | Overview
32
Installation materials
Screwed wall mount Quantity
0.32 in dowel for the screwed wall
mount
3
Spax screw 6x60 stainless steel 3
Screw connection for the housing
to the mounting plate
Quantity
Stainless steel screw M6x22 5
Stopper 3
Stainless steel screw 5x20 T25,
raised cheese head (for the screw
connection of the cover to the hous-
ing)
1
Stainless steel screw 5x20 T25,
raised cheese head (for the screw
connection of the design frame)
2
Stainless steel screw 5x20 T25,
raised cheese head (for the screw
connection of the design front)
1
Cable seal Quantity
Cable bushing plate KEL-SCDP 50 1
Cable bushing plate KEL-DP 20-4-1 1
Information
−
One RJ45 network plug must be provided by the
installer.
− The scope of delivery may include more screws
than necessary.
Required tools
Tools Quantity
Drilling machine / hammer drill 1
Torx screwdriver (TX25) 1
Slot screwdriver 0.02in x 0.08in 1
Cable stripper 1
Tape measure / folding rule 1
Level 1
Tweezers 1
Letter containing access data
You will receive a letter together with your Wallbox
containing your access data and all data Web Appli-
cation required for your Wallbox.
e
Keep the letter containing access data in a safe
place.
Information
The access data valid at the time of delivery, such
as the preset PUK and the initial password, can be
requested from your Porsche Partner in case they are
lost.
− Have serial number of the Wallbox ready
The letter with the access data contains the follow-
ing data:
Description Meaning
Serial Number Wallbox serial number
Hotspot Name
(SSID)
Hotspot name of the Wallbox
Hotspot Pass-
word
Password for the Wallbox hot-
spot
Local Standard
User Password
Initial password for home user
The password is used for log-
ging in to the Web Applica-
tion.
If you lose the initial pass-
word:
e Contact your Porsche
Partner
If you lose your self-assigned
password:
e Reset the Wallbox to fac-
tory settings to reset the
initial password
Local Service
User Password
Customer Service initial pass-
word