Porsche Wallbox - Installation Checklist

GB | Installation Checklist
2
Installation Checklist
b Infrastructure cable inserted in the correct ter-
minals (single-phase vs. 3-phase connection)
_
b Mains conguration set according to household
connection via DIP switch
_
b Charging current set according to household
connection via rotary switch
_
b Applies to: Porsche Wallbox in acc. w. the cali-
bration law: Screws sealed with the user seal
supplied
_
b Design front correctly pushed into the lateral
guide rails
_
b All screws on the wallbox cover, design frame
and design front correctly fastened
_
b Network connection set. Check the status of the
backend indicator light.
_
e
Make sure to check all above mentioned points
to ensure a awless installation.