Porsche Wallbox - Adjust Configuration

Adjust conguration | GB
43
Adjust conguration
Show system settings
b Logged in to the web app as a service user.
e Select System information in the navigation.
🡆
All system settings are shown under Device
information and Grid information.
Change password
b Logged in to the web app as a service user.
e
In the navigation Wallbox settings select Pass-
word.
🡆
In the view Change password a new pass-
word can be assigned by entering the previ-
ous password.
Select language
b
Logged in to the web app as a service user.
e
In the navigation Wallbox settings select Lan-
guage.
🡆
The language of the web app can be set in
the view Language settings.
Select the time and date
b Logged in to the web app as a service user.
e In the navigation Wallbox settings select Date &
Time.
🡆
The time zone and date format can be set in
the view Date & Time.
Setting units of measure
b Logged in to the web app as a service user.
e In the navigation Wallbox settings select Units
of measure.
🡆
The units displayed in the web app can be
set in the view Units of measure.
Set LED brightness
b Logged in to the web app as a service user.
e In the navigation Wallbox settings select LED
brightness.
🡆
The brightness of the LEDs on the design
front can be set in the view Brightness using
the slider.