ST Series User’s Manual
7-12
YES
NO
Are all Tags set up
correctly?
Possible problems with the PLC.
Check if the PLC is working properly.
Check the tag data, and correct the setup values.
Tag Reference Manual
(included with the screen creation software)
YES
YES
NO
NO
Are the corresponding
SIO INITIALIZE
settings OK?
Enter correct settings and values.
6 Initializing the ST
(page 6-1)
Is the
SELF-DIAGNOSIS/
SIO CHECK OK?
There is a problem with
the ST unit.
Please contact your local
ST distributor.
SEE
SEE
To Next Page
Loading...
