Pro-face ST Series - Accessories; Available Software; Serial Interfaces

Chapter 1 Introduction
1-9
1.3 Accessories
All optional equipment listed here is produced by Digital Electronics Corporation.
 Available Software
 Tool Connector
 Serial Interfaces
Product Name Model No. Description
GP-PROPB III
C-Package02 (GP-PRO/PB
III for Windows Ver. 6.30 or
higher
*1
)
*2
*1 Certain types of PLCs cannot be connected.
*2 The ST403 unit requires GP-PRO/PB III C-Package03 Service Pack2 (GP-PRO/PB III
for Windows Ver. 7.20) or higher.
GPPRO-CNT01W-P02
Software to be used to create the
ST's screen data. Installed in a per-
sonal computer.
Product Name Model No. Description
Screen Data Transfer Cable GPW-CB02
Connects the ST to a personal com-
puter. Transfers screen data and user
program(s).
Screen Data Transfer Cable
(USB type)
GPW-CB03
Product Name Model No. Description
RS-232C cable
*1
CA-CBL232/5M-01
(5m)
Interface cables between the host (PLC)
and the ST.
RS-422 cable
*1
CA-CBL422/5M-01
(5m)
Mitsubishi FX Series
Connection Cable
CA-CBLFX/1M-01 (1m)
Connects directly to Mitsubishi PLC FX
Series Device connector I/F. Simulta-
neous use of programming panel, how-
ever, is not possible.
CA-CBLFX/5M-01 (5m)
Mitsubishi Q Link Cable CA3-CBLLINKMQ-01
An interface cable which is able to con-
nect directly to a Mitsubishi PLC-Q.
Omron SYSMAC Cable CA3-CBLSYS-01
An interface cable which is able to con-
nect directly to an Omron PLC-SYSMAC.
Mitsubishi Q Connec-
tion Cable
CA3-CBLQ-01
An interface cable which is able to con-
nect directly to a programming console of
Mitsubishi PLC-Q products.
Mitsubishi A Connec-
tion Cable
CA3-CBLA-01
An interface cable which is able to con-
nect directly to a programming console of
Mitsubishi PLC-A products.