Pro-face ST Series - Error Message Details; System Errors

Chapter 7 RUN Mode and Errors
7-17
7.5 Error Message Details
7.5.1 System Errors
Indicates a fault in the basic operations of the ST.
Following the error message, an error code, as shown below, will appear. Report the error number and details
on how the error developed to your local ST distributor.
 SYSTEM ERROR ( 03 : x x )
An unrecoverable error occurred during screen data transfer.
 SYSTEM ERROR ( x x x : x x x : x x x )
An unrecoverable error occurred during screen data transfer.
Possible Solutions
• Check if the ST's Power Cord and the Input signal line have been wired separately from each other.
• Check that the FG line has been grounded correctly, according to your country's standards.
• Re-send the screen data from the PC to the ST.
• If other types of communication errors, such as [RECIEVE DATA ERROR], [PLC COM. ERROR], have
also occurred, try to correct those problems also.
If the above mentioned methods do not solve the problem, please contact your local ST distributor.
SEE
7.4.1 Error Message List (Page 7-15)
03 : XX
Error No.
Constant Value
xxx:xxx:xxx
Error No.3
Error No.2
Error No.1