Pro-face ST Series - Page 115

ST Series User’s Manual
7-16
PLC COM. ERROR (02 : **)
Specific PLC related error, or an
error has occurred with the PLC.
7.5 Error Message
Details (Page 7-17)
SCREEN MEMORY DATA
IS CORRUPT
(nnnn:mmmm)
ScreenData is corupted:
*nnnn indicates the Screen Number
that has an error.
*mmmm indicates the number of
screens that have errors.(Decimal)
Check the screens that have
errors, correct all errors, and then
transfer the screen data again.
CLOCK SETUP ERROR
The backup battery for the internal
clock is running low.
7.5 Error Message
Details (Page 7-17)
SCREEN TRANSFER
ERROR
An error occurred in the data trans-
mission from the screen editor to
the STpanel.
Re-transfer the screen data.
SCREEN TAG LIMIT
EXCEEDED
Tags are setup beyond the tag limit
(max. of 385.)
7.5 Error Message
Details (Page 7-17)
OBJ. PLC HAS NOT BEEN
SETUP (**)
The host PLC set up in the Editor
program does not match the PLC in
use.
7.5 Error Message
Details (Page 7-17)
D-SCRIPT ERROR (***)
D-Script settings (data) are incor-
rect.
7.5 Error Message
Details (Page 7-17)
GLOBAL D-SCRIPT ERROR
(***)
Global D-Script settings (data) are
incorrect.
7.5 Error Message
Details (Page 7-17)
EXTENDED SIO SCRIPT
ERROR (***)
Extended SIO script settings (data)
are incorrect.
7.5 Error Message
Details (Page 7-17)
Error Message Problem Counter Measure
SEE
SEE
SEE
SEE
SEE
SEE
SEE