ST Series User’s Manual
3-4
• Be sure that the ambient operation temperature and the ambient humidity are
within their designated ranges. (When installing the ST in a cabinet or enclosure,
the term “ambient operation temperature” indicates the cabinet or enclosureís
internal temperature.
• Be sure that heat from surrounding equipment does not cause the ST to exceed
its standard operating temperature.
• When installing the ST in a slanted panel, the panel face should not incline more
than 30°.
• When installing the ST in a slanted panel, and the panel face inclines more than
30°, the ambient temperature must not exceed 40°C.
• When installing the ST vertically, position the unit so that the Power Input Termi-
nal Block is also vertical.
Outside
Cabinet
Inside
Cabinet
30
o
or less
To Next Page
Loading...
