Promise Technology Pegasus3 R4 User Manual

198
Promise Technology Pegasus3 R4/R6/R8
Replacing a Physical Drive
A failed physical drive displays a red X icon in the Pegasus Utility and a red Power / Status LED
on the drive carrier.
Check the failed drive, then obtain a replacement drive of the same:
• Ty p e  – Hard disk drive (HDD) or solid state drive (SSD)
• Interface– SATA 3 Gb/s or 6 Gb/s
• Spinspeed– 7,200 RPM or 15,000 RPM
• Capacity– Equal size or larger
You do not have to install the identical make and model of the physical drives being used. However
replacing with the same make and model of drive makes the process easier and simpler.
You can replace a physical drive without shutting down the Pegasus unit.
Activity LED is blue
Power / Status LED is red
Failed physical drive

Promise Technology Pegasus3 R4 Specifications

General

Internal	No
Chassis type	Tower
Cooling type	Active
Device class	Small & Medium Business
Fan diameter	92 mm
Certification	CB, UL, cUL, TUV , BSMI, SPRING, BIS FCC, CE-EMC, VCCI, BSMI, RCM KCC
Product color	Black
LED indicators	Yes
Number of fans	1 fan(s)
Airflow (imperial)	70 cfm
Management platform	Pegasus Utility
Cable lock slot type	Kensington
RAID levels	0, 1, 1E, 5, 6, 10
Data transfer rate	40 Gbit/s
Storage drive size	3.5 \
Storage drive capacity	4000 GB
Storage drive interface	Serial ATA
Installed storage drive type	HDD
Supported storage drive types	HDD & SSD
Total installed storage capacity	16 TB
Maximum supported storage capacity	- TB
Number of storage drives installed	4
AC input voltage	100-230 V
AC input frequency	50 - 60 Hz
Number of power supply units	1
Power supply unit (PSU) capacity	250 W
Thunderbolt version	3
Thunderbolt ports quantity	2
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 95 %
Cables included	AC, Thunderbolt

Weight and Dimensions

Depth	188 mm
Width	248 mm
Height	195 mm
Weight	6800 g