81
Managing the Pegasus3Pegasus3 Product Manual
Media Patrol
Media Patrol is a routine maintenance procedure that checks the magnetic media on each disk drive.
Media Patrol checks are enabled by default on all disk arrays and spare drives. Media Patrol is
concerned with the media itself, not the data recorded on the media. If Media Patrol encounters a
critical error, it triggers PDM if PDM is enabled on the disk array. See “Making Disk Array Settings” on
page116.
Making Media Patrol Settings
To make Media Patrol settings:
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Check the Enable Media Patrol box to enable, uncheck to disable.
This settings enables or disables Media Patrol for all physical drives.
4. Click the Conrmbutton.
5. Click the X icon to close the background activities panel.
Media Patrol
To Next Page
Loading...
