Руководство пользователя
5. BIOS parameter setting description 128
www.qtech.ru
Figure 5- 43
Configure IPV4 support
BMC sharelink Management Channel Configuration Address source
Configure the BMC IP address allocation mode, the menu options are:
❖ Unspecified: Do not change BMC parameters
❖ Static: BIOS static IP setting
❖ DynamicBmcDhcp: BMC runs DHCP to dynamically allocate IP
❖ DynamicBmcNonDhcp: BMC runs Non-DHCP protocol to dynamically allocate IP
Default value: Unspecified
Modify from Unspecified to other parameters, save and restart after execution,
the option will restore the Unspecified value,
There is no need to configure the BMC IP every time you start the process.
When the Configuration Address source option is Unspecified, the network parameter
information (IPV4) of the system's shared network port will be displayed, the current IP
configuration method, BMC IP, subnet mask, MAC address, routing IP, routing MAC;
BMC Dedicated Management Channel
Configuration Address source
Configure the BMC IP address allocation mode, the menu options are:
❖ Unspecified: Do not change BMC parameters
❖ Static: BIOS static IP setting
❖ DynamicBmcDhcp: BMC runs DHCP to dynamically allocate IP
❖ DynamicBmcNonDhcp: BMC runs Non-DHCP protocol to dynamically allocate IP
Default value: Unspecified
To Next Page
Loading...
General