Руководство пользователя
5. BIOS parameter setting description 129
www.qtech.ru
Modify from Unspecified to other parameters, save and restart after execution, the
option will restore the Unspecified value,
There is no need to configure the BMC IP every time you start the process.
When the Configuration Address source option is Unspecified, the network parameter
information (IPV4) of the system's dedicated network port will be displayed, the current
IP configuration method, BMC IP, subnet mask, MAC address, routing IP, routing MAC;
Configure IPV6 support
BMC Sharelink Management Channel IPV6 Support
Choose whether to support IPV6, the menu options are:
❖ Enabeld: Support IPV6
❖ Disabled: IPV6 is not supported
Default value: Enabeld
Modify from Unspecified to other parameters, save and restart after execution, the
option will restore the Unspecified value,
There is no need to configure the BMC IP every time you start the process.
When the Configuration Address source option is Unspecified, the network parameter
information (IPV6) of the system shared network port will be displayed;
BMC Dedicated Management Channel IPV6 Support
Choose whether to support IPV6, the menu options are:
❖ Enabeld: Support IPV6
❖ Disabled: IPV6 is not supported
Default value: Enabeld
Modify from Unspecified to other parameters, save and restart after execution, the
option will restore the Unspecified value,
There is no need to configure the BMC IP every time you start the process.
When the Configuration Address source option is Unspecified, the network parameter
information (IPV6) of the system dedicated network port will be displayed;
To Next Page
Loading...
General