Руководство пользователя
6. RAID Setting Instructions 153
www.qtech.ru
Figure 6-19 RAID information interface
Figure 6-19
Configure hot spare disk:
1. Enter the RSTe configuration interface.
2.
As shown in Figure 6-20, select Mark Disks as Spare on the RSTe configuration
interface, and press Enter.
Figure 6-20 RSTe configuration interface
Figure 6-20
3. Enter the interface shown in Figure 6-21, select the disk to be configured as a hot
spare disk and press SPACE to select it, then press Enter, in the prompt bar that
appears, enter y and press Enter to complete the hot spare disk configuration.
Figure 6-21 Select Disk
To Next Page
Loading...