Руководство пользователя
6. RAID Setting Instructions 158
www.qtech.ru
2. Enter the interface shown in Figure 6-27, select the disk to be configured, and press
Enter.
Figure 6-27 Drive Management management interface
Figure 6-27
3. Enter the interface shown in Figure 6-28, select Operation, press Enter, and then
select Make Unconfigured Bad in the pop-up dialog box, and press Enter.
Figure 6-28 Operation interface
Figure 6-28
4. Enter the interface shown in Figure 6-29, select Go, and press Enter.
As shown in Figure 6-29, select Go
To Next Page
Loading...
General