Руководство пользователя
6. RAID Setting Instructions 179
www.qtech.ru
2. Enter the interface shown in Figure 6-66, select the logical disk to be initialized, and
press Enter.
Figure 6-66 Logical Disk Management Interface
Figure 6-66
3. Enter the interface shown in Figure 6-67, select Operation, press Enter, and then
select Fast/Slow Initialization in the pop-up dialog, and press Enter.
Figure 6-67 Operation interface
Figure 6- 67
The difference between Fast Initialization and Slow Initialization is that the former can
write data immediately, while the latter needs to wait for the disk space to be initialized
before writing data.
To Next Page
Loading...