Руководство пользователя
6. RAID Setting Instructions 180
www.qtech.ru
4. Enter the interface shown in Figure 6-68, select Go, and press Enter.
Figure 6-68 Select Go
Figure 6- 68
5. Enter the interface shown in Figure 6-69, select Confirm to enable it, select Yes,
and press Enter.
Figure 6-69 Confirm initialization
Figure 6- 69
6. Enter the interface shown in Figure 6-70 to complete the initialization of the logical
disk.
Figure 6-70 Finish initializing the logical disk
To Next Page
Loading...
General