Руководство пользователя
6. RAID Setting Instructions 188
www.qtech.ru
Figure 6- 83
: To avoid disk failure, do not perform other operations during the erasing of
physical disk data.
2. Erase logical disk data
2.1. As shown in Figure 6-84, select Virtual Drive Management on the RAID card
configuration interface, and press Enter.
Figure 6-84 RAID card configuration interface
Figure 6- 46
2.2. Enter the interface shown in Figure 6-85, select the logical disk to be erased,
and press Enter.
Figure 6-85 Logical Disk Management Interface
To Next Page
Loading...