Radwin 2000 D+ - Page 103

RADWIN2000D+UserManual Release3.6.00 7‐23
Management Chapter7
Ethernet
Figure7‐16:SettingEthernetservices
AgingTime
TheRT‐A(HBS)worksinBridgeMode.InBridgemodetheODUperformsbothlearningand
aging,forwardingonlyrelevantpacketsoverthesector.TheagingtimeoftheODUisby
default,300seconds.
EthernetPortsConfiguration
TheODUEthernetportmodeisconfigurable
forlinespeed(10/100/1000BaseT)andduplex
mode(halforfullduplex).
Linespeed1000BaseTisonlyavailableiftheODUisconnectedtoAGbEPoEdevice.
.
AnAutoDetectfeatureisprovided,wherebythelinespeedandduplexmodearedetected
automaticallyusingauto‐negotiation.Usemanualconfigurationwhenattachedexternal
equipmentdoesnotsupportauto‐negotiation.ThedefaultsettingisAutoDetect.