Radwin 2000 D+ - Figure 7-6 Add or Edit Auser

RADWIN2000D+UserManual Release3.6.00 7‐12
Management Chapter7
Tomakeanyofthefollowingchanges,youmustbeloggedonasuseradmin.TheSNMPv3
passwordsforadminandoperatorareasfollows:
 ToaddanSNMPv3user:
1.Clicktherighthandediticononanyemptylineofthelist:
2.AnEditwindowisdisplayed:
Figure7‐6:AddorEditauser
3.Enterausernameandpassword.Confirmthepasswordasindicated.
4.ChooseaProfile:
•ReadOnlyprovidesObserverlevellog‐onaccess.
•ReadWriteprovidesOperatorlevellog‐onaccess
• Disabledstorestheuserdetailsinthedatabaseforfutureuse.Itmustbe
changedtoReadOnlyorReadWritetobecomeusable.
Table7‐2:SNMPv3predefinedusers
UserName Password Profile
admin
netwireless ReadWrite
operator
netpublic ReadOnly