Radwin 2000 D+ - Table 8-1 Get Diagnosticsd

RADWIN2000D+UserManual Release3.6.00 8‐1
Chapter8:Monitoring and
Diagnostics
TheRADWINManagerapplicationenablesyoutomonitorthesector,aswellasperformbasic
diagnosticoperationssuchasthroughputtesting.
Thischaptercovers:
• RetrievingLinkInformation
• ThroughputChecking
• RecentEvents
• PerformanceMonitoring
• ManagerTraps
• ActiveAlarms
Otherrelevantfacilitiesinclude:
• LinkBudgetCalculator
• CustomerService
8.1RetrievingLinkInformation
TheGetDiagnosticsfeaturecollectsandwriteslinkandManagerinformationfromselected
sitesintoatextfile.Thefileinformationcanbeusedfordiagnosticsandshouldbesentto
RADWINCustomerServicetoex pediteassistance.
Thefollowingtablelistslinkandsysteminformationthatcanbemonitored.
Table8‐1:GetDiagnosticsDat aandDescription
Data Description
SystemData Generalinformationaboutthesystem
EventsLog
•Listofsystemeventsincludingthosefromothersitesifthissite
isdefinedasthetrapdestination
•Last256eventsfromallsites
LinkInformation InformationabouttheRT‐A(HBS)andRT‐B(HSU)settings