Radwin 2000 D+ - Table 16-1 Default Priorities

RADWIN2000D+UserManual Release3.6.00 16‐1
Chapter16:QualityofService
16.1Prerequisites
TousethefacilityyoumustbefamiliarwiththeuseofVLAN(802.1p)orDiffserv.
16.2QoS‐Overview
QoSisatechniqueforprioritizationofnetworktrafficpacketsduringcongestion.
RADWIN2000D+linkssupporttwoclassificationcriteria,VLANbasedorDiffservbased.You
maychoosewhichofthemtouse.
Basedupontheclassificationcriterionchosen,receivedpacketswillbemappedintooneof
fourqualitygroups:Realtime,Nearrealtime,ControlledloadandBesteffort.
YoumaypartitionthetotallinkcapacityacrossthefourQualityqueues.Thedefaultweights
aspercentagesareshowninTable 16‐1.
16.3SettinguptheLinkforQoS
16.3.1PreparingforQoS
OpenServicesConfigurationandthenclicktheQoSConfigurationbutton.
Table16‐1:Defaultpriorities andallocationbyVLANIDandDiffserv
Qualityqueue
Priority
Diffserv VLAN
Realtime
48‐63 6‐7
Nearrealtime(responsive
applications)
32‐47 4‐5
Controlledload
16‐31 2‐3
Besteffort
0‐15 0‐1