Radwin 2000 D+ - Figure 6-11 Add

RADWIN2000D+UserManual Release3.6.00 6‐21
ChangingtheLinkBand Chapter6
Figure6‐11:Add/ChangeBanddialog
3.Clicktherightbutton.Thefollowingwindowopens:
4.Hereyoumaychosetheworkingchannelbandwidthandchannelselectionasinthe
activationprocess.(WewillsetCBWto80MHzandACSfullyselected.)ClickOKto
acceptyourchoice.YouarereturnedtothedisplayinFigure 6‐11.
5.ClickOKagain.Thefollowingcautionarymessageisdisplayed: