Radwin 2000 D+ - Figure 6-14 Logging on to

RADWIN2000D+UserManual Release3.6.00 6‐26
BulkSoftwareBackup Chapter6
Figure6‐14:LoggingontotheRT‐B(HSU)overtheair
Noticetheover ‐the‐airindicatorinthestatusline:
6.5BulkSoftwareBackup
ThiscoveredindetailinSoftwareBackupandRestore.
6.6ConfigurationwithTelnet
6.6.1TelnetAccesstoEitherODU
ATelnetterminalcanbeusedtoconfigureandmonitortheRADWIN2000D+.
TostartaTelnetsessionontheRT‐A(HBS),usetelnet<ODU_IP>.
Forexample,ifyourunTelnetasfollows,
telnet10.104.3.2
youwillbeaskedforausernameandpassword.
TheTelnetlogonusernameisthepasswordthatyouusedtoentertheRADWINManager
(forexample,thedefault:admin).TheTelnetpasswordisthecorrespondingCommunity
string(default:netman).