Radwin 2000 D+ - Figure 5-4 Extended Log - on Window; Figure 5-5 Log on Window Exposing the User Types

RADWIN2000D+UserManual Release3.6.00 5‐5
TheRADWINManagerLog‐onConcept Chapter5
5.3TheRADWINManagerLog‐onConcept
RADWIN5000supportsSNMPv1andSNMPv3eitherseparatelyortogether.Thelog‐on
procedurediffersslightlybetweenoperationunderSNMPv1andSNMPv3.Inwhatfollows
below,weassumethatSNMPv1isinuse.InTable 5‐2atendofthesection,weshowthe
differencebetweenSNMPv1andSNMPv3atlog‐ontime.
TheRADWINManagerprovidesthreelevelsofaccessinoneoftwoentrymodes.Tosee
them,clickOptionsatanytimeintheLogonwindow(Figure 5‐2above).Youareofferedan
extendedlog‐onwindow:
Figure5‐4:Extendedlog‐onwindow
AttheUserTypefield,clickthelistbutton:
Figure5‐5:Logonwindowexposingtheusertypes.
Therearethreeusertypes: