Radwin 2000 D+ - Figure 21-1 Web Interface - L

RADWIN2000D+UserManual Release3.6.00 21‐3
ScopeofthisChapter Chapter21
Youcannot:
» ChangedefaultTxPower
»ConfigureSpatialMultiplexing/Diversity
» ManageotherfeaturessuchasGSU(whensupported),VLAN,QoS
»PerformSoftwareupgrade
Beverycareful:
»UsingthistoolifyourlinkisprovidingCustomerServ ice whichmaynotbeinterrupted
withsync‐losses
21.7ScopeofthisChapter
Theremainderofthischapterisdividedintothreesections:Loggingon,HBSConfiguration
andHSUConfiguration.
21.8Loggingon
TousetheWebinterface,simplypointyourbrowsertotheIPaddressofthesitetowhichyou
areconnected.
Figure21‐1:Webinterface‐Logon
TheUserNameandPasswordarerespectively,adminandnetmanasusedforTelnetaccess.
YoumustclicktheLogInbuttontoeffect
entrytotheWI.